Nismo top front upper bushes

8 required to do left and right, inner and outter

BILSTEIN SHOCK ABSORBERS FOR NISSAN 300ZX TWIN TURBO (Z32)

AVAILABLE FOR THE FRONT AND REAR

PRICE: $370 EACH

VELOCITY SENSING VALVING. MICRO SMOOTH HARD CHROMED PISTON RODS, SEAMLESS CYLINDERS AND EYE RINGS OR CAR DIAL ADJUSTMENT FOR DAMPENING RATE.

BUDDY CLUB RACING SPEC COILOVER SUSPENSION FOR 300ZX

• DOUBLE HEIGHT ADJUSTMENT
• SPRING PLATFORM AND SHOCK BASE WITH LOCKING RINGS
• 15 WAY ADJUSTABLE DAMPNER
• PILLOWBALL UPPPER MOUNTS
• SUITABLE FOR STREET AND TRACK USE
• DAMPER (FRONT) 12K/H200 (REAR) 10K/H200

NOTE: R33 GTS-T KIT PICTURED

TEIN SUPER STREET COILOVERS FOR NISSAN 300ZX

• 16 LEVELS OF DAMPENING FORCE ADJUSTMENT
• ADJUSTABLE RIDE HEIGHT
• IDEAL FOR STREET AND RACE USE
• HIGH PERFORMANCE AND EXTREMELY COST EFFECTIVE
• REBUILDABLE DAMPER FOR REPAIR/OVERHAUL OR REVALVING
• EXCLUSIVELY DESIGNED FOR AUSTRALIAN APPLICATIONS

THE ULTIMATE IN PERFORMANCE SUSPENSION WITH THE ABILITY TO RAISE OR LOWER THE CARS RIDE HEIGHT. IDEAL FOR TRACK USE. NEW FLEX HA MODEL FEATURES MULTI ADJUSTABLE SHOCKS WITH ADJUSTABLE HEIGHT & PILLOW BALL TOPS

SPRING RATE:

F: 65MM (DIAMETER) 8.0KG/200MM
R: 65MM (DIAMETER) 7.0KG/250MM

LOWERING RANGE:

F: -25 ~ -85MM
R: +1 ~ -59MM

FRONT AND REAR SHOCKS AVAILABLE FOR 300ZX. USES FACTORY SPRINGS

GREDDY SPRINGS

TECH PROGRESSIVE RATE LOWERED

SUIT ALL ZEDS

TEIN SPRINGS

TECH PROGRESSIVE RATE LOWERED

SUIT ALL ZEDS

LOWERS CARS BY 25-40MM FRONT & REAR. SUITS NISSAN 300ZX

UAS TENSION ROD SUPPORT BRACE

IMPROVES HANDLING BY REDUCING FLEX IN THE FRONT END.

CHROME MOLLY TIG WELDED

Powder Coated black

SUITABLE FOR TWIN TURBO OR NON TURBO 300ZX

UAS FRONT OR REAR STEERING ROD FOR NISSAN 300ZX

FACTORY LENGTH - $75 EACH
10, 20MM, 30MM LONGER THAN FACTORY - $95 EACH

ALLOY ADJUSTABLE RADIUS RODS

WITH 3 PIECE ROD ENDS

PRICE: $260 PER PAIR

optional rubber dust boots $20 extra

UAS REAR UPPER LEADING CONTROL ARMS FOR 300ZX

REAR UPPER LEADING CONTROL ARMS FOR ADJUSTABLE TOE ANGLE. ESSENTIAL FOR CARS THAT ARE LOWERED OR HAVE INCREASED TIRE DIAMETER.

REDUCES TIRE WEAR AND IMPROVES TRACTION AND STABILITY, AND PREVENTS PLAY IN THE REAR SUSPENSION

SPHERICAL BEARINGS HAVE RUBBER PROTECTIVE BOOTS FOR BETTER WEATHER RESISTANCE AND SUPERIOR BEARING LIFE.

UAS FRONT ADJUSTABLE LOWER CONTROL ARMS

• ROLL CENTRE ADJUSTABLE
• ADJUSTABLE LENGTH
• STIFFER THAN OEM STEEL ARMS

UAS ADJUSTABLE LOWER REAR CONTROL ARMS

UAS ADJUSTABLE UPER REAR CONTROL ARMS

OFFERS MORE CASTER FOR BETTER TURN IN EVENLY TO BOTH SIDES AND WONT SPLIT LIKE FACTORY UNIT

ENERGY SUSPENSION COMPLETE URETHANE BUSH KIT FOR 300ZX

SUITABLE FOR 90-96 NISSAN 300ZX N/A & TT

KIT INCLUDES:

• FRONT LOWER CONTROL ARM BUSHINGS
• FRONT RADIUS ROD BUSHES
• FRONT AND REAR SWAY BAR BUSHES
• REAR SUBFRAME BUSHES
• REAR RACK AND PINION BUSHES
• REAR DIFFERENTIAL CARRIER BUSHES
  

ADJUSTABLE URETHANE BUSH WITH OFFSET CAMBER PIN. THE BOLTS HAVE A PLINE TO ADJUST IN CAR. CAN BE USED FOR INNER AND OUTER TO GIVE AROUND 2.5 DEGREES OF ADJUSTMENT, OR 1 DEGREE IF ONLY PAIR IS USED.

URETHANE BUSHES TO REPLACE THE FACTORY SILICON FILLED UNITS THAT TEAR & CRACK OVER TIME.

FRONT OR REAR

STIFFER AND STRONGER THAN FACTORY ITEMS. AVAILABLE TO SUIT MOST NISSANS

COMES WITH SLEAVE FOR EASY INSERTION INTO RADIUS ROD. INCLUDES NUTS/BOLTS, GREASE & NOTCHES FOR EASY ADJUSTMENT

COMES AS A SET OF 4 BUSHES. REPLACED FACTORY BUSHES WHICH ARE TOO SOFT FOR HIGH HP OR TRACK CARS.

FIRMS UP THE REAR OF THE VEHICLE TO IMPROVE HANDLING.

EASY INSTALLATION

OFFERS 1 DEGREE OF ADJUSTMENT

ALLOY REAR CRADLE SPACERS FOR NISSAN 300ZX

USED TO PREVENT EXCESSIVE MOVEMENT IN THE REAR OF THE VEHICLE CAUSED BY HIGHER POWER ENGINES & EXTREME DRIVING. IMPROVES HANDLING

FRONT SWAY BAR 27MM $260
SPHERICAL BEARING ADJUSTABLE LINKS $155

REAR FIXED SWAY BAR $220

PRICES AS PER DESCRIPTION

UAS URETHANE DIFF MOUNTING BUSHES FOR NISSAN 300ZX (Z32)

REPLACES WORN FACTORY RUBBER BUSHES.

IMPROVES HANDLING AND REDUCES AXLE TRAMP

BILLET ALLOY BRACE COMPLETE WITH FITTINGS & ADAPTER FOR HIGH PRESSURE HOSE

STEEL.

REMOVE YOUR EXISTING HEAVY TROUBLESOM FACTORY HYDRAULIC OR ELECTRIC REAR STEERING RACK.

• MADE FROM AIRCRAFT ALUMINIUM ALLOY
• HARD ANODISED
• KNURLED ENDS FOR QUICK THREADING

AVAILABLE IN 12.5MM X 1.25 OR 12MM X 1.5 THREAD