HIGH PERFORMANCE YET SMOOTH DRIVING WITH INCREASED
CLAMP LOAD. EACH UAS CLUTCH IS TESTED AND THE CLAMP LOAD IS WRITTEN ON PRESSURE PLATE.

SUIT SR20DET

PRICE: $695

FEATURES MODIFIED PIVOT POINT AND DIAPHRAM TO INCREASE CLAMPING PRESSURE BY 40%. ANTI-BURST CASTING (NODULAR IRON), 6 FINGER CENTERED BRONZE CERAMETALLIC CLUTCH PLATE PROVIDES EXCELLENT GRIP. SUITABLE FOR ROAD AND RACE. EACH UAS CLUTCH IS TESTED AND THE CLAMP LOAD IS WRITTEN ON PRESSURE PLATE.

PRICE: $495 EXCHANGE

PRICE: $695 OUTRIGHT

FEATURES MODIFIED PIVOT POINT AND DIAPHRAM TO INCREASE CLAMPING PRESSURE BY 40%. ANTI-BURST CASTING (NODULAR IRON), 6 FINGER CENTERED BRONZE CERAMETALLIC CLUTCH PLATE PROVIDES EXCELLENT GRIP. SUITABLE FOR ROAD AND RACE. EACH UAS CLUTCH IS TESTED AND THE CLAMP LOAD IS WRITTEN ON PRESSURE PLATE.

PRICE: $550 EXCHANGE

PRICE: $695 OUTRIGHT

ORGANIC SPORTS CLUTCH FEATURING 30% INCREASED CLAMP LOAD AND MADE WITH STEEL BACKING FOR STRENGHENED CLUTCH PLATE. EACH UAS CLUTCH IS TESTED AND THE CLAMP LOAD IS WRITTEN ON PRESSURE PLATE.

PRICE: $450 EXCHANGE

PRICE: $595 OUTRIGHT

6 BUTTON CERAMIC BRONZE COMPOSITE CLUTCH FOR S15.
EACH UAS CLUTCH IS TESTED AND THE CLAMP LOAD IS WRITTEN ON PRESSURE PLATE.

PRICE: $595.00 EXCHANGE

PRICE: $750.00 OUTRIGHT

XTREME CHROME MOLLY ONE PIECE FLYWHEEL FOR NISSAN SILVIA

SUIT NISSAN SR20 ENGINE - WEIGHS 5.5KG

ULTRALIGHT VERSION ALSO AVAILABLE WEIGHING ONLY 4.3KG

PRICE: $440.00

PRICE: $530 (ULTRALIGHT VERSION)

S15 BILLET ALLOY FLYWHEEL

BILLET ALLOY FLYWHEEL WITH REPLACEABLE BILLET STEEL FACE.

WEIGHS APPROXIMATELY 5KG

Chrome Molly one piece for S15  $580

requires different bolts extra $70

PRICE: $695

XTREME BILLET FLYWHEEL FOR NISSAN SILVIA & 180SX

BILLET ALLOY FLYWHEEL WITH BILLET STEEL FACE. COMES WITH
HEAT TEMPERED RING GEAR, LOCATING DOWELS AND LOCTITE

SUIT SR20 ONLY - WEIGHS 4.3KG

PRICE: $570

LIGHTENED BILLET STEEL FLYWHEEL.

HARDER THAN THE STANDARD FLYWHEEL FOR LESS WEAR.

WEIGHS 6.0 KG

FEATURES INCLUDE:

• SHARPER THROTTLE RESPONSE AND BETTER ACCELERATION
• ONE PEICE WITH INTEGRATED RING GEAR
• HEAT TEMPERED
• CROSS DRILLED FOR BETTER COOLING AND GREATER SURFACE AREA
• BETTER BALANCE THAN FACTORY CAST IRON UNIT
• NOT AVAILABLE FOR S15 200SX

ALLOY BASE -STRONGER, STIFFER AND LIGHTER THAN FACTORY UNIT.
WEIGHS 740 GRAMS COMPARED TO 1240 FOR THE FACTORY MOUNT.

TEFLON BRAIDED HOSE WITH FITTINGS AND ALLOY WASHERS, AND MOTORSPORT HEAT SLAVE TO GO STRAIGHT FROM YOUR CLUTCH MASTER TO SLAVE

LIGHTER AND STRONGER THAN THE FACTORY ITEM

PRICE: $120

UAS HIGH TENSILE CLUTCH PIVOT BALL & WASHER FOR SR20

FACTORY UNITS CAN AND DO BREAK, ESPECIALLY WHEN
USED WITH HEAVY DUTY CLUTCHES

REPLACES THE FACTORY BRONZE SWEAT BUSH TYPE AS PER PHOTO

STRONGER THAN FACTORY WITH LESS FRICTION