S13 alloy coolant overflow tank

 

 PRICE: $145

NITTO H-BEAM CON RODS FOR SR20


PRICE: $500

NITTO I-BEAM CON RODS FOR SR20


PRICE: $860
NITTO SR20 2.2L STROKER KIT (I-BEAM RODS) PRICE: $3930
NITTO SR20 2.2L STROKER KIT (H-BEAM RODS) PRICE: $3615

NITTO SR20 HEAD GASKETS

AVAILABLE FOR:

SR20 1.2MM / 88MM BORE
SR20 1.5MM / 88MM BORE
SR20 1.8MM / 88MM BORE
PRICE: $360
NITTO SR20 ENGINE GASKET KIT PRICE: $295
NITTO SR20 FULL GASKET KIT (DBS HEAD GASKET AND ENGINE GASKET KIT) PRICE: $529

NITTO SR20 FORGED PISTONS

 
SR20 DET-86.5MM / +0.020"
SR20 DET-86.5MM / +0.040"

 

PRICE: $870

NITTO SR20 CRANKSHAFTS

 
SR20 STANDARD STROKE SUIT 2.0L 86.0MM STROKE
SR20 LONG STROKE SUIT 2.2L 91.0MM STROKE

 

PRICE: $2375

Click for larger image

GREDDY OVERSIZED PULLEY KIT FOR NISSAN SILVIA S13,14,15

GREDDY WATER PUMP, ALT AND POWER STEERING PULLEYS MADE FROM DURALUMIN (A2017) ANNODISED BLUE. LESS THAN HALF THE WEIGHT OF FACTORY STEEL ONES FOR IMPROVED THROTTLE RESPONSE.

PRICE: $430
Click for larger image
 ROSS BILLET 2 PIECE HARMONIC BALANCER FOR SR20DET

SUIT S13 / S14 / S15

  • MANUFACTURED FROM BILLET ALLOY Vs FACTORY CAST
  • WILL NOT FLY APART AT HIGH RPM'S AS CAST FACTORY ONE CAN
  • ANDRA APPROVED

 

BALANCER PRICE: $595

 

4% UNDERDRIVEN WATER PUMP PULLEY PRICE: $220

Click for larger image

Click to Enlarge

Click to Enlarge

 GREDDY SR20 1 LITRE LARGER SUMP

WITH BAFFLES, FINS FOR COOLING AND FULL FITTING KIT


PRICE: $540

Click for larger image

Click for larger image

 UAS RADIATOR AIR GUIDE FOR SILVIA S15

IMPROVES MUCH NEEDED COOLING IN S15 200SX. STOPS AIR GOING OVER RADIATOR AND FORCES AIR THROUGH IT.

INCLUDES ALL BOLTS AND WASHERS REQUIRED FOR FITTING

 PRICE: $99
NO IMAGE AVAILABLE
 UAS EXTRUSION HONED INLET PLENUM AND RUNNERS FOR S14/S15

EXTRUSION HONED INLET PLENUM AND RUNNERS WITH 60MM THROTTLE BODY, UP FROM 55MM IN STOCK FORM

TO VIEW EXTRUSION HONE RESULTS - CLICK HERE

 PRICE: $695 TNA
Click for larger image
 ARP CONROD BOLTS FOR SR20DET

HEAVY DUTY CONROD BOLTS

 PRICE: $150
Click for larger image
 ARP HEAD STUD KIT FOR CA18DET

 

 PRICE: $220 PER SET
Click for larger image
 ARP HEAD STUD KIT FOR SR20DET

 

 PRICE: $250 PER SET

Click for larger image

Click for larger image

Click for larger image

Click for larger image

ACL/ROSS RACING PISTONS

PERFECT FOR HIGH PERFORMANCE ROAD OR RACE USE

THESE PISTONS FEATURE:

  • CHAMFERED PORTS AND EDGES
  • LOW SILICON CONTENT FOR ADDED STRENGTH
  • THICK AND STRONG SKIRTS
  • QUALITY GAS NITRIDED STEEL RINGS WITHOUT THE FANCY COATINGS THAT TEND TO WEAR OFF WITH HEAT
  • PROVEN RELIABILITY FOR HIGH BOOST AND HIGH HEAT TURBO RACE MOTORS
  • EXCEPTIONAL QUALITY

AVAILABLE IN 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED

FULLY MACHINED CROWNS INCLUDE VALVE RECESSES READY TO GO

COMES AS SET OF 4 WITH RINGS

 PRICE: $780 PER SET

Click for larger image

Click for larger image

 CP PISTONS

CA18 AND SR20, 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED WITH RINGS AND PINS

PRICE: $1,050 SET

Click for larger image

Click to Enlarge

NISMO ENGINE MOUNTS

SUIT S13 - CA18 ENGINES
AND S13,S14 AND S15 - SR20 ENGINES

TRANSMISSIONS MOUNTS ALSO AVAILABLE

PRICE: $190 EACH

 

 
UAS Performance Duel Spring

Utilises factory retainer etc.

PRICE: $295
Click for larger image
 UAS TYPE 2 OIL COOLER KIT WITH OIL FILTER RELOCATION KIT

INCLUDES SANDWICH BLOCK, HOSES, FITTINGS & OIL COOLER

USES 19 ROW -10 OIL COOLER WITH BRAIDED LINES

 PRICE: $410
Click for larger image

NISMO OIL FILTER

FEATURES:

  • 21% LESS PRESSURE LOSS
  • 24% INCREASE IN FILTRATION
  • 10% LESS FLOW RESISTANCE
  • 37% INCREASED LIFE
 PRICE: $49 EACH
Click for larger image
 OIL AIR SEPERATOR

CUSTOM MADE

PRICE: $P.O.A
Click for larger image
 UAS 550+HP FUEL PUMP

255 LITRES PER HOUR, IN TANK FUEL PUMP WITH FITTING KIT

 PRICE: $210
Click for larger image
 SARD FUEL INJECTORS

AVAILABLE IN 500 - 850CC

SUIT SR20DET

NOTE: SIDE FEED INJECTORS PICTURED

INCLUDES COLLARS, SEALS & 0-RINGS READY TO FIT

PRICE: $220 (EACH)

 
Click for larger image
 NISMO FUEL INJECTORS

555CC INJECTORS FOR SR20DET

 PRICE: $220 EACH

Click for larger image

Click for larger image

 SPAL 16"CURVED BLADE THERMO FAN

 

 PRICE: $260
NISMO HIGH PRESSURE RADIATOR CAP PRICE: $95
GREDDY HIGH PRESSURE RADIATOR CAP

 

 PRICE: $55
Click for larger image
 TRUST OIL FILER CAP

AVAILABLE IN CHROME OR ANNODISED BLUE

 PRICE: $149

NISMO OIL FILER CAP

 

 

 PRICE: $155